Year: 2025
-
Caterham 420R Front Right Scan
Post Views: 9 Here’s a scan I’ve recently done of the front right of my 420R. It’s not water tight by any stretch of the imagination, but if you’re looking for something to show you where all the bits and pieces tie together, then this should be ok. Files: OBJ 3MF I find the 3MF…
-
Caterham TIE ROD LEVER – PRE 2015
Post Views: 8 This steering arm was scanned as a request from UberNiche for a project he’s working on. In the end it was scanned by an Einscan HX in structured-light mode. I tried using the Einstar but it struggled to get into the holes of the part. Scanning juice was used to try and…
-
SimplE Engine Cooling – Low Flying
Post Views: 5 On the back of the YouTube video I also wrote up a short engine cooling explainer for the Caterham & Lotus Seven Club’s monthly magazine, Low Flying. More info here… Simple Engine Cooling Explained
-
Caterham Duratec S3 Engine Mount RHS
Post Views: 3 This model was generated from a scan of the engine mount and modeled in Fusion 360. NOTE: The engine mount I modeled had about a 1mm bulge in the engine plate which is not accounted for in the model. Link to Model OBJ
-
Caterham Duratec S3 Engine Mount LHS
Post Views: 8 This model was generated from a scan of the engine mount and modeled in Fusion 360. NOTE: The engine mount I modeled had about a 1mm bulge in the engine plate which is not accounted for in the model. Link to Model OBJ