Category: Magazine Articles
-

The Electric in Electric Vehicles – YOUTUBE PTEVIS 2.1
First Project sEVen electric-vehicle explainer covering core EV terminology, high-voltage and low-voltage systems, batteries, motors, and controllers for the Caterham conversion.
-

3D Scanning My EV Conversion Project Car
Excuses, Excuses Ok… so… I’ve been distracted. Since starting this EV conversion project I’ve got a bit distracted by a couple of other projects. The first was the Caterham and Lotus Seven Club, in general and specifically the move to the new website. But I also found I was getting involved in way more other…
-

PMSM Motor Internals Video
As part of a larger explainer video I wanted to show how a Permanent Magnet Synchronous Motor Works. I wanted to show how the stator and rotor interacted with their respective magnetic fields and currents. The video shows how a simplified motor is constructed with a Stator and Rotor and then breaks those down to…
-

Finally a good Press-Stud Tool
This one’s as much a note for me so I know what I did to make this finally work. I’ve been looking for a decent way of fitting press-studs for things like boot covers. I’d tried the standard manual tap-and-hope tools that are supplied with the car and with SoftBitsForSevens kits. But that always seemed…
-

Putting the EV in sEVen – Youtube Project Kick-off
Project sEVen kickoff video introducing the Caterham electric conversion, the project goals, and why the video series exists alongside the written build notes.
-

Lowflying December 2022 – Putting the EV in sEVen – Conversion Trade-offs
Another article in Lowflying for December 2022. This is part 2 of a multi-part series and is a cut down version of this post:
-

sEVen Tradoffs and Compromises
A cut down version of this post appeared in the December 2022 edition of Lowflying. This full version is a little more wordy but contains more detail, images and with hyperlinks. Putting the EV in sEVen – Part 2 : Conversion Tradeoffs With my sEVen conversion car now purchased, I’m well and truly getting my feet…
-

It’s not Merchandise
Well I had to, didn’t I? It seemed such a great tag line “Putting the EV in sEVen” that I just had to get some T-shirts printed… and hoodies, polos and fleeces! 🤣 I used a local printing company called Carrillion here in Bristol. They were crazy busy but did manage to get me my stuff…



