Caterham 5/6 Speed Gearbox Mount Scan

As part of my Putting The EV in Seven project I needed to have a good model of the gearbox mount that Caterham used on their 5/6 speed installations.

I had a partial scan of the mount with it in the car but that wasn’t going to be good enough for my needs. So… I ordered a new one from Caterham, as well as taking the old one out of the project car.

Turns out they’re different. The new one is wider (in the front/rear of the car direction, i.e. along its shorter side). I’ll be going with the new version that Caterham now sells, so it was time to scan and then model the part.

• 
• 
• 
• 
• 
• 
• 

Controls

×

• Rotate with the left mouse button.
• Zoom with the scroll button.
• Adjust camera position with the right mouse button.
• Double-click to enter the fullscreen mode.
• On mobile devices swipe to rotate.
• On mobile devices pinch two fingers together or apart to adjust zoom.
• On mobile devices 3 finger horizontal swipe performs panning.
• On mobile devices 3 finger horizontal swipe performs panning.

Here are the files, please attribute me if you use them:

• Scan OBJ
• Parametric Model OBJ
• Parametric Model STEP