SV Rear Top Scan

Here’s a scan of my 420R SV rear top. I did the scan mainly to capture the roll-over bar, but you may find other geometry interesting if you need it.

This is a 2M triangle render, if you’d like higher resolution then send me an email or get in touch on socials.

• 
• 
• 
• 
• 
• 
• 

Controls

×

• Rotate with the left mouse button.
• Zoom with the scroll button.
• Adjust camera position with the right mouse button.
• Double-click to enter the fullscreen mode.
• On mobile devices swipe to rotate.
• On mobile devices pinch two fingers together or apart to adjust zoom.
• On mobile devices 3 finger horizontal swipe performs panning.
• On mobile devices 3 finger horizontal swipe performs panning.

And here are the files to download. I prefer to work with the 3mf files… they seem to include scale better than obj when I work with them.

• SVTopRear2M.3mf
• SVTopRear2M.obj

The model has been measured to be about 0.5mm short from side to side (the scan was done at 0.5mm resolution, so not surprising that the model is +/-0.5mm)