This steering arm was scanned as a request from UberNiche for a project he’s working on. In the end it was scanned by an Einscan HX in structured-light mode. I tried using the Einstar but it struggled to get into the holes of the part. Scanning juice was used to try and fill in some of the holes – to some success, but there are still holes in the models.
I’ve left the model hole-y so anyone taking the files can decide how the holes should be filled.
Note: the STL and OBJ files come in at 10x size when imported into Fusion360. The 3MF seems to come in at the right scale.
Here are the source files:
Leave a Comment