{"id":730,"date":"2017-09-09T23:59:08","date_gmt":"2017-09-09T22:59:08","guid":{"rendered":"http:\/\/www.purplemeanie.co.uk\/?p=730"},"modified":"2025-01-31T13:13:15","modified_gmt":"2025-01-31T13:13:15","slug":"build-session-15-odds-and-ends-bonnet-and-radiator","status":"publish","type":"post","link":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/09\/09\/build-session-15-odds-and-ends-bonnet-and-radiator\/","title":{"rendered":"Build Session 15 : Odds and Ends, Bonnet and Radiator"},"content":{"rendered":"\n

This post is a rollup of a few days tinkering. I’m sure many of you will be relieved that I’m not going to spam you with any more posts than I absolutely have to, and so I’ll combine a few together.<\/p>\n\n\n\n

Sept 5th – Bonnet Arrived (for a while)<\/h3>\n\n\n\n

The bonnet (Americanese: hood) of the kit had been the only known part that had not been shipped when the kit first arrived (if we ignore the shorts box that should have been on the van). It had a couple of defects that Caterham were going to get fixed and then send out. However, it had taken a few weeks before the van was back in our area, which wasn’t a problem since the idea of having the bonnet kicking around the garage was not something I really needed, given our small play area.<\/p>\n\n\n\n

So the bonnet was dropped off by the Caterham delivery guy today in a rather snugly fitting cardboard box. I had half a mind to leave it in the box to keep it safe but decided I’d better check it had arrived ok…. unfortunately, it hadn’t. There were some scratches and scuffs on the paintwork at the rear of the bonnet. This is in stark contrast to the rest of the paintwork – which to my eye – is immaculate.<\/p>\n\n\n\n

I emailed Derek and he assured me it had left the factory ok and he had no hesitation in saying that it would be sorted, just needed to find a time when the van was back in the area and could pick up the bonnet again. I’m not going to post pictures of the issue here, I think that would be an unfair publication of an issue that Caterham are on top of.<\/p>\n\n\n\n

In the meantime, I needed somewhere to keep the bonnet safe while I waited. I’ve mentioned before that I have a trolley left over from the days of having a 911-996 C4Cab – used to store the hard top when not in use.<\/p>\n\n\n\n

\"\"<\/a>
Bonnet Trolley<\/figcaption><\/figure>\n\n\n\n

The new bonnet fits nicely on it (with soft rubber moulded rests for it to sit on at the bottom and foam pads at the rear).<\/p>\n\n\n\n

\"\"<\/a>
Bonnet on the trolley<\/figcaption><\/figure>\n\n\n\n

However, this was still going to get dinged if I left it in the small confines of the garage like that. So… a bonnet for the bonnet. I took some of the cardboard from the box that the bonnet came in and made a cover for it on the trolley.<\/p>\n\n\n\n

\"\"<\/a>
Bonnet with it’s bonnet and trolley<\/figcaption><\/figure>\n\n\n\n

Of course, I only spotted the defects on the bonnet after close inspection and after having created this trolley and cardboard contraption. My first look at the bonnet didn’t show any defects. It was only when I got really close that I saw them. That’s not to say they’re small, I just didn’t see them straight away. The point of this thread is to say… if I’d seen the scratches earlier then I would have put the bonnet straight back in its box and kept it safe there. But, I’d already broken down the cardboard box to use with the trolley. I guess it would also have been the case that if I’d have put the bonnet back in its box after a cursory look, then I probably wouldn’t have seen the scratches that night and it would have been weeks before getting it out of its box again. Swings and roundabouts.<\/p>\n\n\n\n

Sept 6th – Test Fit Radiator and Heater<\/h3>\n\n\n\n

This week was turning into a week like any other… able to grab the odd hour or 30 minutes in the evenings away from a conference bridge. During one of those hours I started to see how the main water radiator, oil radiator and associated plumbing was going to work.<\/p>\n\n\n\n

I’d already had a bit of a look at the radiator a couple a week earlier when I’d gone through the manual and tried to figure out where all the pieces for this part of the build were located. This is where I couldn’t find the “inner radiator cowl” as called for in the manual. I had sent an email out to Derek asking if I was missing it and got this response:<\/p>\n\n\n\n

“We no longer fit the cowling to the 420R as we felt the cooling was better without it.”<\/p><\/blockquote>\n\n\n\n

This must be a reasonably recent decision as I’ve seen what I thought were recent blog posts from people where there clearly has been an inner cowl fitted.<\/p>\n\n\n\n

Back to this test fit though… this time I wasn’t just “part picking” I was loosely hooking everything up and trying to figure out how this would work with no cowl.<\/p>\n\n\n\n

There were two discoveries here:<\/p>\n\n\n\n

  1. The manual describes how to fit everything together in the section on the Sigma and Duratec wet-sump engine build.<\/li>
  2. I was missing the radiator fan legs. The radiator fan should have 4 legs that slot into the fan and have flanges that have holes in them to fix to the black “bat wing” extensions.<\/li><\/ol>\n\n\n\n

    A quick email to Derek again and he popped the fan legs into the post. Even without the fan I was able to hook most things up and look at how I was going to drill out the holes in the SV extension brackets to take the upper oil cooler fixings.<\/p>\n\n\n\n

    \"\"<\/a>
    The radiator extension brackets for the SV chassis attached to the outside of the chassis mounts<\/figcaption><\/figure>\n\n\n\n

    Its fairly obvious which way up the extension brackets go. One of the brackets was in my “shorts” box.<\/p>\n\n\n\n

    \"\"<\/a>
    The bat wings sit behind the radiator and should have the fan at on them<\/figcaption><\/figure>\n\n\n\n

    I got as far as I could with a test fit of this section but decided not to do any drilling of the radiator extensions for the oil cooler at this stage.<\/p>\n\n\n\n

    Sept 7th – Heater<\/h3>\n\n\n\n

    Another evening, another 30 minute slot to play with…  so I moved onto the heater. It seemed I needed to shift the battery by loosening its mountings and bringing it as far forward as it would go. Otherwise the heater refused to drop down behind the battery.<\/p>\n\n\n\n

    \"\"<\/a>
    Shifting the battery forwards on its mounts<\/figcaption><\/figure>\n\n\n\n

    I put the passenger compartment vents in place (with the ears pointing downwards as recommended) and then put the heater unit into place.<\/p>\n\n\n\n

    \"\"<\/a>
    Internal heater vents in place, view from driver’s side.<\/figcaption><\/figure>\n\n\n\n

    The heater then slots in-between the scuttle and the battery.<\/p>\n\n\n\n

    \"\"<\/a>
    Heater sitting in front of the firewall\/scuttle. Notice the plastic bows out from the firewall leaving a gap – not a problem IMHO.<\/figcaption><\/figure>\n\n\n\n

    As you can see in the image above, there’s a gap between the heater assembly and the firewall\/scuttle edge. I’ve seen some people post and say they’ve added a bead of silicone to the heater edge to seal the gap. Perhaps I’ve got the wrong end of the stick with what they’re doing but I don’t see how this helps. In the picture below you can see the foam strip that runs around the aperture, behind the round vents at the bottom of the picture, where the air is actually blown into the passenger compartment. That is what is providing the airtight seal for the heater, not any silicone added to the top edge. Silicone is also nasty stuff… not nice to remove if I ever need to remove the heater, or anything else afflicted by the use of it. I’ll use silicone sparingly.<\/p>\n\n\n\n

    \"\"<\/a>
    Looking at heater assembly with passenger vents still attached (and as they come, which is upside down!). The white\/grey line running from left to right actually runs around the sides and bottom and provides an air seal. No need for silicone bead IMHO<\/figcaption><\/figure>\n\n\n\n

    Sept 9th – Fit Radiators and Oil Hoses<\/h3>\n\n\n\n

    The fan legs had arrived by now and I had a relatively free day to see if I could fit the radiator, fan, oil radiator and associated bracketry.<\/p>\n\n\n\n

    First get the SV radiator extensions and metalastic bobbins on.<\/p>\n\n\n\n

    \"\"<\/a>
    Radiator extensions outside the chassis again. Not a knobbly knee contest.<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Seems to have a nut roaming free… need to fish that out again!<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Bat wings and fan over bobbins, this time with fan legs. The dome headed bolts seemed to make sense and have no reason to think that was a bad decision as I write this later on<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    View from the top<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Checking level. This was me being OCD… there’s quite a bit of “play” in the whole assembly and I wanted to make sure it was all true. Having the radiator wonky won’t help with air pockets in the water system later – though the rad would have to be seriously off level for that to be a big problem I think<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Radiator added in front of fan<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    View of radiator assembly from the back. ISTM that you could think about the bat wings sitting between the SV extension brackets and the bobbins – that doesn’t work though as the fan then fouls on the ARB.<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Marking out where to drill for the oil radiator bracket. You drill through both the radiator side flange and the bat wing – at least I did.<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Spring centre punch has been useful throughout the build<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Cleaning up the bat wing<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Now it looks a bit like this<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    And from the side<\/figcaption><\/figure>\n\n\n\n

    I then had a play around test fitting the oil hoses to the engine and the oil radiator. It wasn’t until a little later that I realised the part numbers written on the hoses are actually shown on the schematic diagram of the oil cooling system in the user manual – it’s small writing but you can read the part numbers. As it happened I’d figured out which hoses go where anyway, but would have saved myself a few minutes if I’d read the manual better. Another case of RTFM.<\/p>\n\n\n\n

    \"\"<\/a>
    View of oil hoses from underneath<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    Oil hoses going into dry sump. The hose running out of the left of frame may need some protection against rubbing on the cross member just above the label<\/figcaption><\/figure>\n\n\n\n
    \"\"<\/a>
    View of the top of the engine bay with radiators and oil hoses loosely in place. Various other pipework is draped around to get an idea of where each pipe will go and and how long they need to be<\/figcaption><\/figure>\n\n\n\n

    That was all I had time for today… now a quick dash from Bristol to Edinburgh to deliver Harry to University.<\/p>\n","protected":false},"excerpt":{"rendered":"

    This post is a rollup of a few days tinkering. I’m sure many of you will be relieved that I’m not going to spam you with any more posts than I absolutely have to, and so I’ll combine a few together. Sept 5th – Bonnet Arrived (for a while) The bonnet (Americanese: hood) of the […]<\/p>\n","protected":false},"author":1,"featured_media":995,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[3,51],"tags":[33],"class_list":["post-730","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-caterham-420r-build","category-caterham-blog","tag-build"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2241.jpg","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8yl38-bM","jetpack-related-posts":[{"id":372,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/08\/14\/email-1-caterham-derek-shortages-bellhousing-and-iva-trim-questions\/","url_meta":{"origin":730,"position":0},"title":"Email 1 – Caterham (Derek) : Shortages, Bellhousing and IVA Trim Questions","author":"John Martin","date":"August 14, 2017","format":false,"excerpt":"Here's the first, and hopefully only (you've gotta think positively haven't you) email and answers in-line, to Caterham's chief fixer, Derek. I called him a couple of times on the Monday morning but the poor guy was only just back from a week off so I was only really calling\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":344,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/08\/11\/our-kit-car-has-arrived\/","url_meta":{"origin":730,"position":1},"title":"Our Kit Car Has Arrived","author":"John Martin","date":"August 11, 2017","format":false,"excerpt":"After 151 days since putting in our order, the Purplemeanie Caterham 420R Kit Car has arrived! We got final confirmation of a delivery date earlier this week and a courtesy call from Caterham yesterday confirmed that they would deliver our car before lunch time today... ... And at just after\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1652.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":1046,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/10\/11\/build-session-24-two-steps-back-and-two-steps-forwards-iva-front-brakes-headlamps-and-a-trip-to-caterham\/","url_meta":{"origin":730,"position":2},"title":"Build Session 24 : Two steps back and two steps forwards – IVA, Front Brakes, Headlamps and a trip to Caterham","author":"John Martin","date":"October 11, 2017","format":false,"excerpt":"After feeling quite pleased with my progress to date I'd got to the point of thinking about applying for an IVA test. From what I can tell the process goes like this: Fill out forms 1c and 4Collect photos of buildGet a copy of your invoiceSubmit two forms, photos and\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/10\/IMG_2940.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":464,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/08\/24\/williams-visit-6-track-day-roll-bar-and-iva-discussion\/","url_meta":{"origin":730,"position":3},"title":"Williams Visit 6 : Track Day Roll Bar and IVA Discussion","author":"John Martin","date":"August 24, 2017","format":false,"excerpt":"Nick from Williams called today to say that the track rollover-bar, that I'd ordered, had arrived. So, in between meetings I popped over to the showroom to pick it up. Track roll over bar in its bubble wrap at Williams While I was there I took the opportunity to look\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/08\/IMG_1827.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":1590,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/11\/23\/build-session-34-brake-and-clutch-fillup-bleed-bonnet-collection-and-more-front-wings\/","url_meta":{"origin":730,"position":4},"title":"Build Session 34 : Brake and Clutch Fillup\/Bleed, Bonnet Collection and more Front Wings","author":"John Martin","date":"November 23, 2017","format":false,"excerpt":"Day 2 of The Big Push!... and I'm also getting close to pushing the button on putting a date in the diary for the PBC (Post Build Check) back at Williams and then of course the government IVA (Individual Vehicle Test) test too. If I'm really, really lucky it will\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/11\/IMG_0099.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":733,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2017\/09\/16\/build-session-16-roll-over-bar-some-engine-plumbing-and-bonnet-test-fit-with-nose-cone\/","url_meta":{"origin":730,"position":5},"title":"Build Session 16 : Roll Over Bar, Some Engine Plumbing and Bonnet Test Fit with Nose Cone","author":"John Martin","date":"September 16, 2017","format":false,"excerpt":"This is a catch up post. Things had been busy with work and family stuff so I only had a couple of short periods that I've bunched up into one build session. Sept 12th Roll Over Bar Whilst looking for something simple to do one evening I thought I'd have\u2026","rel":"","context":"In "Caterham 420R Build"","block_context":{"text":"Caterham 420R Build","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/caterham-420r-build\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2017\/09\/IMG_2337.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_likes_enabled":true,"_links":{"self":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/730","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=730"}],"version-history":[{"count":1,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/730\/revisions"}],"predecessor-version":[{"id":10740,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/730\/revisions\/10740"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media\/995"}],"wp:attachment":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=730"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=730"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=730"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}