{"id":12318,"date":"2026-11-20T19:00:00","date_gmt":"2026-11-20T19:00:00","guid":{"rendered":"https:\/\/purplemeanie.co.uk\/?p=12318"},"modified":"2026-11-22T21:12:21","modified_gmt":"2026-11-22T21:12:21","slug":"2026-11-20-project-seven-update","status":"publish","type":"post","link":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/20\/2026-11-20-project-seven-update\/","title":{"rendered":"2026-11-20 Project sEVen Update"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">This week has been a bit of a wash. We were away last weekend (which is why the updates stopped) and I\u2019ve had a couple of days out and about this week. So only 2 or 3 days on the project.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Gearbox<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">I\u2019ve had some progress on the gearbox this week. I\u2019ve finally got a quote (don\u2019t ask) for producing the 6 main hardened steel component types that I\u2019ll need. These are the 3 gear components (sun, planets, ring), planet-pins x 2 and the output shaft. I\u2019m almost certainly going ahead with the quote, but it\u2019ll be a 20-week build time \ud83d\ude41<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The remaining components, sort of, fall into two further groups. There\u2019s the four Aluminium casing components, then basically everything else that\u2019s left.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At the moment I\u2019m most keen on getting the casings 3D printed. I\u2019ve found a crowd in the UK that can do it and also a Chinese company that comes recommended. So between the two of them 3D printing should be possible. There\u2019s all sorts of challenges with 3D printing, and the components will need a lot of post-machining, but the wastage is much lower as you don\u2019t need to hollow out the component from a huge great billet. The biggest component is around 200 \u00d7 200 \u00d7 200 mm and is essentially hollow with about an 8mm wall thickness. That\u2019s a lot of material to remove from the inside\u2026 if you\u2019re machining it from billet. 3D printing obviously only has to build up layers of just the walls as they\u2019re needed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the \u201cremaining\u201d components, they should be relatively easy to get made by most engineering firms, so I\u2019m not too worried about them at the moment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Last weekend I also created a new gearbox animation for someone who was quoting for me. This is another astonishing AI thing\u2026 I gave ChatGPT Codex a copy of the 3D model of the gearbox, told it what the gear ratios were (though it figured that out too from the geometry) and then asked it for an exploded view and an animation of the gearbox working. (And if you\u2019re into this stuff then it used Fusion 360 to get the model and then Blender to render out the animation). I\u2019ve done these sorts of Gearbox animations, on older versions of the gearbox, in Blender, by hand myself and they\u2019ve usually taken me a few days. Codex took a few minutes to create the Blender files. I then went back and forth on some cosmetic niceties over an hour or so\u2026 each time Codex took a few minutes to add my changes. Then I rendered the whole thing out in 4k &#8211; which ran overnight. So Codex saved me days of my time for something that I used to find fun, but now find a bit of a chore after doing it 4 or 5 times over the past 2 years.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Animation to follow\u2026 Bonkers!<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<span class=\"embed-youtube\" style=\"text-align:center; display: block;\"><iframe loading=\"lazy\" class=\"youtube-player\" title=\"YouTube video player\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/JAovSVVbgg8?version=3&#038;rel=1&#038;showsearch=0&#038;showinfo=1&#038;iv_load_policy=1&#038;fs=1&#038;hl=en-US&#038;autohide=2&#038;wmode=transparent\" allowfullscreen=\"true\" style=\"border:0;\" sandbox=\"allow-scripts allow-same-origin allow-popups allow-presentation allow-popups-to-escape-sandbox\"><\/iframe><\/span>\n<\/div><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Powertrain Earthing<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">I also spent a day or so this week mucking about with the earthing of the main powertrain components: traction DCDC converter, inverter and motor.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I\u2019ve been seeing quite a lot of common mode noise being injected onto the inverter CANbus when the Inverter is in its operating mode. See next image\u2026<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1357\" data-attachment-id=\"12315\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-scaled.png\" data-orig-size=\"2560,1357\" data-comments-opened=\"1\" data-image-title=\"project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The CAN2 capture before adding the earthing cables, showing the noise spikes I was investigating.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-2048x1086.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-scaled.png\" alt=\"Logic analyser capture of CAN2 with decoded digital traffic above two analogue traces showing coincident voltage spikes and ringing.\" class=\"wp-image-12315\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-scaled.png 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-600x318.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-2048x1086.png 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-768x407.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-logic-pro-16-can2-common-noise-pre-earthing-1-1536x814.png 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption class=\"wp-element-caption\">The CAN2 capture before adding the earthing cables, showing the noise spikes I was investigating.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">One theory was that the powertrain earthing might be a bit lacking &#8211; i.e. there wasn\u2019t any. It hadn\u2019t been a priority, so I hadn\u2019t added it\u2026 yet. So I spent a day or so making up some relatively beefy (6 mm\u00b2) cables to run between the components and the power supply.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Here\u2019s a quick video of the earthing. If anyone has any comments then I\u2019m all ears!<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<span class=\"embed-youtube\" style=\"text-align:center; display: block;\"><iframe loading=\"lazy\" class=\"youtube-player\" title=\"YouTube video player\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/MvoKDEko80Y?version=3&#038;rel=1&#038;showsearch=0&#038;showinfo=1&#038;iv_load_policy=1&#038;fs=1&#038;hl=en-US&#038;autohide=2&#038;wmode=transparent\" allowfullscreen=\"true\" style=\"border:0;\" sandbox=\"allow-scripts allow-same-origin allow-popups allow-presentation allow-popups-to-escape-sandbox\"><\/iframe><\/span>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">It made bugger all difference. So I suspect I need to take another look at the inverter power supplies. Helix say this noise is mostly expected\u2026 but I\u2019d like to get rid of it if I can.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Battery Management<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">While I was mucking about with cabling, I\u2019ve also been looking this week to get my \u201chigh voltage\u201d batteries connected &#8211; instead of a bench power supply.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This wasn\u2019t quite as simple as it first appeared. The HV batteries are second-hand VW ID3 battery modules. They were mostly charged when I got them a year ago, and they\u2019ve not really lost any charge since then &#8211; that\u2019s good news\u2026 And is an interesting data point for the people who always ask me how long EV batteries last if you don\u2019t use your car.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now I could absolutely just connect up the battery. And probably would have had no problem for a few weeks\u2026 given the actual small amount of energy I\u2019m currently using.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But\u2026 at some point I do need to connect up and get programmed, the Battery Management System (BMS) that will monitor battery charge level, battery health and also manage the battery charging process. And that all needs software.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The problem was that I was running out of space on the Vehicle Control Unit (VCU). I\u2019d been vibe coding with ChatGPT Codex for a few months and it had created quite a bit of bloat, both in terms of Flash and RAM. I\u2019d added all sorts of diagnostics, instrumentation and snapshots that helped get the code running in the first place, but weren\u2019t needed (all the time) now. So I spent a few days reducing the code footprint: hiding diagnostic code behind compile-time options and looking at other stuff like stack usage. I dropped the RAM requirement by about 25%, which gives me room to add the BMS code.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I only have one battery module connected at the moment, so 12 cells of about 3.7V, totalling 44-ish volts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">As I sit here on Friday night, I have the BMS plumbed into the code, reading cell voltages and feeding all that back into the diagnostic web interface. But for some reason the BMS seems to think 12 x 3.7 is 36V, not 44V! Grrr!<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1938\" height=\"1120\" data-attachment-id=\"12316\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-2026-11-20-update-web-bms-panel\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel.png\" data-orig-size=\"1938,1120\" data-comments-opened=\"1\" data-image-title=\"project-seven-2026-11-20-update-web-bms-panel\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The BMS panel: twelve cells at around 3.7 V each, but a reported pack voltage of only 36.49 V. Something still to sort out!&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel.png\" alt=\"BMS diagnostic panel showing twelve cell readings around 3.7 V, a reported pack voltage of 36.49 V, stale data indicators and blocked charge and discharge permissions.\" class=\"wp-image-12316\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel.png 1938w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel-600x347.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel-768x444.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-web-bms-panel-1536x888.png 1536w\" sizes=\"auto, (max-width: 1938px) 100vw, 1938px\" \/><figcaption class=\"wp-element-caption\">The BMS panel: twelve cells at around 3.7 V each, but a reported pack voltage of only 36.49 V. Something still to sort out!<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">And that\u2019s what I\u2019ve been up to this week.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A Project sEVen progress update: gearbox manufacturing quotes and animation, powertrain earthing investigations, and making room in the VCU software for battery management.<\/p>\n","protected":false},"author":1,"featured_media":12317,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_seo_schema_type":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[51,38,26],"tags":[55,58,66,89,57,64],"class_list":["post-12318","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-caterham-blog","category-electric-vehicles","category-youtube","tag-3d-models","tag-can-bus","tag-caterham","tag-drivetrain","tag-electric-vehicles","tag-project-seven"],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8yl38-3cG","jetpack-related-posts":[{"id":12285,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/07\/2026-11-project-seven-gearbox-update\/","url_meta":{"origin":12318,"position":0},"title":"2026-11 Gearbox Update","author":"John Martin","date":"November 7, 2026","format":false,"excerpt":"A November 2026 update on the Project sEVen gearbox: the completed 3.5:1 reduction design, the search for manufacturers, and a 3D-printed version.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"3D-printed cutaway model of the Project sEVen gearbox, showing coloured internal components, gears, shafts and bearings","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":8125,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2022\/09\/30\/seven-index\/","url_meta":{"origin":12318,"position":1},"title":"Putting the EV in sEVen &#8211; Index","author":"John Martin","date":"September 30, 2022","format":false,"excerpt":"Project sEVen is the electric conversion thread for the Caterham, covering mechanical packaging, EV power electronics, CAN bus diagnostics, 3D scanning, CAD references, and systems integration.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":10940,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2025\/09\/16\/caterham-5-6-speed-gearbox-mount-scan\/","url_meta":{"origin":12318,"position":2},"title":"Caterham 5\/6 Speed Gearbox Mount Scan","author":"John Martin","date":"September 16, 2025","format":false,"excerpt":"3D scan reference for the Caterham 5\/6 speed gearbox mount, supporting Project sEVen packaging, CAD work, and drivetrain geometry decisions.","rel":"","context":"In &quot;3D Models&quot;","block_context":{"text":"3D Models","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/3d-models\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/09\/GearboxMountQuickie720p.gif?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/09\/GearboxMountQuickie720p.gif?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/09\/GearboxMountQuickie720p.gif?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/09\/GearboxMountQuickie720p.gif?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/09\/GearboxMountQuickie720p.gif?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":11033,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2025\/11\/28\/caterham-sv-prop-shaft-scan\/","url_meta":{"origin":12318,"position":3},"title":"Caterham SV Prop-Shaft Scan","author":"John Martin","date":"November 28, 2025","format":false,"excerpt":"The next in the list of things I've scanned is the prop-shaft from a Caterham Seven SV.\u00a0It's taken me a couple of years to get around to extracting this from the EV project car, but I need a model now to verify the CAD for the gearbox that's being designed.","rel":"","context":"In &quot;3D Models&quot;","block_context":{"text":"3D Models","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/3d-models\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/Prop-Shaft-Scan-Header-Image.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/Prop-Shaft-Scan-Header-Image.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/Prop-Shaft-Scan-Header-Image.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/Prop-Shaft-Scan-Header-Image.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/Prop-Shaft-Scan-Header-Image.png?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":10884,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2025\/04\/30\/putting-the-ev-in-seven-progress-2-strip-down-and-weigh-in\/","url_meta":{"origin":12318,"position":4},"title":"Putting the EV in sEVen &#8211; Progress #2 Strip Down and Weigh-in","author":"John Martin","date":"April 30, 2025","format":false,"excerpt":"Project sEVen progress video covering the Caterham strip-down, removal of the internal-combustion drivetrain, weigh-in work, and related EV project events.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":11049,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2025\/11\/30\/project-seven-pt7-qa-and-weekly-updates\/","url_meta":{"origin":12318,"position":5},"title":"Project sEven pt7 : Q&amp;A and Weekly Updates","author":"John Martin","date":"November 30, 2025","format":false,"excerpt":"Project sEVen Q&A and weekly update video covering the mission, project feasibility, recent progress, and viewer questions around the Caterham EV conversion.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/11\/PTEVIS7-QA-Update-003-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_likes_enabled":true,"jetpack_featured_media_url":"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-2026-11-20-update-exploded-project-seven-gearbox-scaled.jpg","_links":{"self":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12318","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=12318"}],"version-history":[{"count":1,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12318\/revisions"}],"predecessor-version":[{"id":12325,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12318\/revisions\/12325"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media\/12317"}],"wp:attachment":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=12318"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=12318"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=12318"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}