{"id":12312,"date":"2026-11-12T19:00:00","date_gmt":"2026-11-12T19:00:00","guid":{"rendered":"https:\/\/purplemeanie.co.uk\/?p=12312"},"modified":"2026-11-22T18:21:28","modified_gmt":"2026-11-22T18:21:28","slug":"2026-11-project-seven-amphenol-powerlok-connectors","status":"publish","type":"post","link":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/12\/2026-11-project-seven-amphenol-powerlok-connectors\/","title":{"rendered":"Amphenol Powerlok Connectors"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Well, after lighting the AI blue touch paper yesterday, today\u2019s update is back to more physical things. Chunky High Voltage connectors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">My EV will have two high voltage regimes\u2026 a low-side and a high-side. The LS connects to the battery and has a 260V connection, while the HS is a more exciting 800V. The Traction DC to DC (TDCDC) converts backwards and forwards between the two as needed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now some physics\u2026 apart from some losses in the TDCDC, the power going in is the same as the power coming out. And power is Volts times Amps. Therefore LS is low voltage and high current while the HS is the opposite, high voltage, low current.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">High and low are relative terms here. The voltages and currents in both cases are high by domestic standards and both are very dangerous!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">And even though I\u2019m only working on my bench at low-ish powers, the kit I have is expecting all those thick cables, and that needs some pretty heavy-duty connectors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I was tempted to just stuff some smaller cables into the TDCDC and inverter but in the end I decided that was too risky, and so I was going to have to use the proper connectors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The TDCDC connections are simple, they are just 8mm lugs and so I can make those up with my hand-hydraulic crimper. There\u2019s lots of cutting of insulation and peeling back of shielding, but they\u2019re not too tricky to put together.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The real problems are the Amphenol Powerlok connectors. They\u2019re serious bits of kit and cost well over \u00a3100 a connector. Unfortunately, once assembled, they\u2019re not something I know how to dismantle and reuse. So I was going to have to dump a few hundred quid just to connect up my bench.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But they\u2019re also a bit of a conundrum to assemble. Here\u2019s all the bits for the two-terminal connector.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1920\" data-attachment-id=\"12305\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-img-3535\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-scaled.jpeg\" data-orig-size=\"2560,1920\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;1.78&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1790431944&quot;,&quot;focal_length&quot;:&quot;6.7649998656528&quot;,&quot;iso&quot;:&quot;100&quot;,&quot;shutter_speed&quot;:&quot;0.010526315789474&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-amphenol-powerlok-connectors-img-3535\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;All the bits for the two-terminal connector. Working out the assembly order was the first challenge.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-2048x1536.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-scaled.jpeg\" alt=\"Disassembled two-terminal Powerlok connector with metal contacts, ferrules, seals and retaining pieces laid out on a green cutting mat.\" class=\"wp-image-12305\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-scaled.jpeg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-600x450.jpeg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-2048x1536.jpeg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-768x576.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3535-1536x1152.jpeg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption class=\"wp-element-caption\">All the bits for the two-terminal connector. Working out the assembly order was the first challenge.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The next problem was that I couldn\u2019t find the correct assembly guide. There\u2019s a lot of bits and pieces, they don\u2019t come in the package in the order that you\u2019re supposed to assemble them, and finding the guide proved to be a nightmare.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I ended up installing the inverter DC connection by hacking it together with a 3D printed ferrule I designed. I just couldn\u2019t figure out how they all went together and I just kludged something as best I could.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Then it came to the inverter to motor 3-phase AC connector. Helix had supplied me with some 1m \u201ctails\u201d already set up with the motor connections, but that also meant I had some 50 mm\u00b2 cables that I needed to use (yes that\u2019s a lot of copper in a cable, and they\u2019re actually the smallest ones I\u2019ll need). This is an 800V connection, so you\u2019ve got to be careful about arcing etc. So I couldn\u2019t just knock something up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">After half a dozen search attempts, over a few weeks, I finally found the correct assembly manual. All the websites that you can buy the connectors from (and the one I bought my connectors from) had an out of date assembly manual that didn\u2019t give me any clues about how to assemble the new ones.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But I did find it in the end. And they\u2019re multilingual brain-teasers in themselves\u2026<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1912\" height=\"1502\" data-attachment-id=\"12306\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot.png\" data-orig-size=\"1912,1502\" data-comments-opened=\"1\" data-image-title=\"project-seven-amphenol-powerlok-connectors-scr-20261112-sbot\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The correct assembly guide at last \u2014 showing where the insulation sleeve and retaining clip belong.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot.png\" alt=\"Powerlok assembly instructions in English and Chinese, with annotated photos showing the insulation sleeve and plastic retaining clip.\" class=\"wp-image-12306\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot.png 1912w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot-600x471.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot-768x603.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-scr-20261112-sbot-1536x1207.png 1536w\" sizes=\"auto, (max-width: 1912px) 100vw, 1912px\" \/><figcaption class=\"wp-element-caption\">The correct assembly guide at last \u2014 showing where the insulation sleeve and retaining clip belong.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">And that made it all clear, about what order to assemble all the bits and pieces. And because of the high voltages I decided the only way to do it safely was to do it as per the assembly guide.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The next problem was that my hand hydraulic crimper didn\u2019t have a big enough set of jaws to deal with the large shield ferrule.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I needed to clamp this so there was a good electrical connection to the shield.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1920\" height=\"2560\" data-attachment-id=\"12307\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-img-3561\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-scaled.jpeg\" data-orig-size=\"1920,2560\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;2.2&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1791478990&quot;,&quot;focal_length&quot;:&quot;2.2200000286119&quot;,&quot;iso&quot;:&quot;500&quot;,&quot;shutter_speed&quot;:&quot;0.02&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-amphenol-powerlok-connectors-img-3561\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The shield ferrule before crimping \u2014 too large for the jaws on my hand-hydraulic crimper.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-1536x2048.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-scaled.jpeg\" alt=\"Orange high-voltage cable with a metal contact fitted at its end and an uncrimped shield ferrule sitting farther down the cable.\" class=\"wp-image-12307\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-scaled.jpeg 1920w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-450x600.jpeg 450w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-1536x2048.jpeg 1536w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-768x1024.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3561-1152x1536.jpeg 1152w\" sizes=\"auto, (max-width: 1920px) 100vw, 1920px\" \/><figcaption class=\"wp-element-caption\">The shield ferrule before crimping \u2014 too large for the jaws on my hand-hydraulic crimper.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">There are definitely bits of kit out there that will clamp these ferrule sizes. But they stretched into the hundreds of pounds and the really proper kit was thousands.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">And that was where I had the brainwave. I could buy the jaws for about a hundred quid and make my own clamp.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The idea was to use a bench vice to provide the clamping power, the jaws would crush the ferrule into the right shape, but I needed a guide.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">So I designed a 3D printed guide system to enclose the jaws, sit in my vice and allow a crimp. I could also design the guide so the ferrule sat in exactly the right place and the crush would happen just where I wanted it.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Here\u2019s the video of the 3D design working in CAD.<\/p>\n\n\n\n<figure class=\"wp-block-video\"><video height=\"1080\" style=\"aspect-ratio: 1920 \/ 1080;\" width=\"1920\" controls src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-fusion-ferrule-crimp.mp4\"><\/video><figcaption class=\"wp-element-caption\">The ferrule crimping guide in CAD, showing how the parts fit together.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">And here\u2019s the contraption working.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1440\" data-attachment-id=\"12308\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-scaled.png\" data-orig-size=\"2560,1440\" data-comments-opened=\"1\" data-image-title=\"project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The contraption in action: the vice supplies the force while the printed guide holds the jaws and ferrule in position.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-2048x1152.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-scaled.png\" alt=\"Bench vice holding a grey 3D-printed guide and crimping jaws around an orange cable while the vice handle is turned.\" class=\"wp-image-12308\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-scaled.png 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-600x338.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-2048x1152.png 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-768x432.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-powerlok-bench-crimp-1536x864.png 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption class=\"wp-element-caption\">The contraption in action: the vice supplies the force while the printed guide holds the jaws and ferrule in position.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1920\" height=\"2560\" data-attachment-id=\"12309\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-img-3573\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-scaled.jpeg\" data-orig-size=\"1920,2560\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;2.2&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1791733055&quot;,&quot;focal_length&quot;:&quot;2.2200000286119&quot;,&quot;iso&quot;:&quot;200&quot;,&quot;shutter_speed&quot;:&quot;0.02&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-amphenol-powerlok-connectors-img-3573\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;A closer look at the ferrule sitting in the jaws inside the printed guide.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-1536x2048.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-scaled.jpeg\" alt=\"Close-up of a cable shield ferrule between metal crimping jaws inside a bolted grey 3D-printed guide.\" class=\"wp-image-12309\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-scaled.jpeg 1920w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-450x600.jpeg 450w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-1536x2048.jpeg 1536w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-768x1024.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3573-1152x1536.jpeg 1152w\" sizes=\"auto, (max-width: 1920px) 100vw, 1920px\" \/><figcaption class=\"wp-element-caption\">A closer look at the ferrule sitting in the jaws inside the printed guide.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">It was then just a case of crimping up all the other bits and pieces and assembling the connectors. Once assembled, there are non-return latches inside that I currently have no idea how to release.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">And that was about 3 weeks of thinking, tinkering, CAD\u2019ing and assembling. When you\u2019re mucking about with \u00a3100+ connectors I didn\u2019t want to just trash a few to figure out how they worked. It all had to be very deliberate and considered.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But I got there in the end. Here\u2019s the three-way connector from the inverter to the motor\u2026<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1920\" data-attachment-id=\"12310\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-amphenol-powerlok-connectors-img-3592\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-scaled.jpeg\" data-orig-size=\"2560,1920\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;1.78&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1792065374&quot;,&quot;focal_length&quot;:&quot;6.7649998656528&quot;,&quot;iso&quot;:&quot;125&quot;,&quot;shutter_speed&quot;:&quot;0.01&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-amphenol-powerlok-connectors-img-3592\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The finished three-way connection between the inverter and motor. A lot of thinking and tinkering to get to this point!&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-2048x1536.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-scaled.jpeg\" alt=\"Three orange phase cables connecting the bench-mounted motor to a three-way Powerlok connector on the inverter, beside protective gloves.\" class=\"wp-image-12310\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-scaled.jpeg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-600x450.jpeg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-2048x1536.jpeg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-768x576.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-1536x1152.jpeg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption class=\"wp-element-caption\">The finished three-way connection between the inverter and motor. A lot of thinking and tinkering to get to this point!<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>Assembling the Project sEVen high-voltage connectors, tracking down the right instructions and designing a 3D-printed guide to crimp shield ferrules in a bench vice.<\/p>\n","protected":false},"author":1,"featured_media":12310,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_seo_schema_type":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[51,38],"tags":[55,66,89,57,64],"class_list":["post-12312","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-caterham-blog","category-electric-vehicles","tag-3d-models","tag-caterham","tag-drivetrain","tag-electric-vehicles","tag-project-seven"],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8yl38-3cA","jetpack-related-posts":[{"id":12296,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/10\/2026-11-project-seven-bench-motor-mount\/","url_meta":{"origin":12312,"position":0},"title":"2026-11 Bench Motor Mount","author":"John Martin","date":"November 10, 2026","format":false,"excerpt":"Building a more substantial motor mount for the Project sEVen test bench, using aluminium plate and angle with a 3D-printed drilling and cutting template.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"Electric motor bolted to the aluminium mounting plate and angle bracket on the bench, with orange phase cables across the front.","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-motor-mount-img_3694-scaled.jpeg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":8548,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2024\/02\/25\/the-electric-in-electric-vehicles-youtube-ptevis-2-1\/","url_meta":{"origin":12312,"position":1},"title":"The Electric in Electric Vehicles &#8211; YOUTUBE PTEVIS 2.1","author":"John Martin","date":"February 25, 2024","format":false,"excerpt":"First Project sEVen electric-vehicle explainer covering core EV terminology, high-voltage and low-voltage systems, batteries, motors, and controllers for the Caterham conversion.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS2.1-002-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":8262,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2023\/03\/21\/putting-the-ev-in-seven-lowflying-part-3-ev-bits-and-pieces\/","url_meta":{"origin":12312,"position":2},"title":"Putting the EV in sEVen &#8211; Lowflying part 3 : EV Bits and Pieces","author":"John Martin","date":"March 21, 2023","format":false,"excerpt":"This article first appeared in the February edition of the Caterham and Lotus Seven Club's Lowflying magazine. I also created an animated overview of all of this in this video below: https:\/\/youtu.be\/8tDo6ezOMu0 What's in an EV Conversion A more detailed version of this video will be coming soon. And here's\u2026","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2023\/03\/Test-Cycles-250W-with-Lineart-Exp-0.25-Gamma-1.4.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":12304,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/11\/2026-11-project-seven-ai-generated-electronics\/","url_meta":{"origin":12312,"position":3},"title":"2026-11 AI Generated Electronics","author":"John Martin","date":"November 11, 2026","format":false,"excerpt":"Designing a custom CAN bus sniffer adapter PCB with ChatGPT, checking the design with a printed prototype and breadboard, and testing the manufactured boards.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"Assembled green adapter PCB with a USB-connected processor board, OLED displaying CAN1 traffic and an attached OBD cable.","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":11273,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/04\/24\/project-seven-pt9-traction-dc2dc-converter-bring-up\/","url_meta":{"origin":12312,"position":4},"title":"Project sEVen Pt9: Traction DC2DC converter Bring Up","author":"John Martin","date":"April 24, 2026","format":false,"excerpt":"Project sEVen update covering traction DC-DC converter bring-up, high-voltage testing, low-voltage integration, CAN bus work, and the Caterham EV testbench.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":8552,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2024\/03\/03\/electric-vehicle-components-youtube-ptevis-2-2\/","url_meta":{"origin":12312,"position":5},"title":"ELECTRIC VEHICLE COMPONENTS &#8211; YOUTUBE PTEVIS 2.2","author":"John Martin","date":"March 3, 2024","format":false,"excerpt":"Second Project sEVen electric-vehicle explainer covering the major EV conversion components, including battery, motor controller, low-voltage systems, charging, and supporting electronics.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS-2-2.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS-2-2.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS-2-2.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS-2-2.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/03\/PTEVIS-2-2.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]}],"jetpack_likes_enabled":true,"jetpack_featured_media_url":"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-amphenol-powerlok-connectors-img-3592-scaled.jpeg","_links":{"self":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12312","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=12312"}],"version-history":[{"count":3,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12312\/revisions"}],"predecessor-version":[{"id":12324,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12312\/revisions\/12324"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media\/12310"}],"wp:attachment":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=12312"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=12312"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=12312"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}