{"id":12304,"date":"2026-11-11T19:00:00","date_gmt":"2026-11-11T19:00:00","guid":{"rendered":"https:\/\/purplemeanie.co.uk\/?p=12304"},"modified":"2026-11-22T17:43:40","modified_gmt":"2026-11-22T17:43:40","slug":"2026-11-project-seven-ai-generated-electronics","status":"publish","type":"post","link":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/11\/2026-11-project-seven-ai-generated-electronics\/","title":{"rendered":"2026-11 AI Generated Electronics"},"content":{"rendered":"<p>Ok, so we had a practical update yesterday, back to the AI today.<\/p>\n<p>And if you haven\u2019t been following\u2026 AI IS BONKERS!<\/p>\n<p>I know a lot of you only skim these posts (don\u2019t blame you) so I\u2019ll cut to the chase. I got AI to create a printed circuit board, from scratch, with just text prompt input from me and I got it made in China and sent to me within 2 weeks! And it WORKED FIRST TIME!<\/p>\n<p>So for those of you that do read the drivel I write\u2026<\/p>\n<p>As some of you will remember, I\u2019ve got some history with CANbus. I wrote a couple of articles for LowFlying in 2019 about the OBD port on a Duratec Seven. CANbus is the name of the signalling that goes through the OBD port &#8211; doing engine maps and fault code reporting etc. The OBD port is the black dangly electronics-y thing under your steering column on a Seven.<\/p>\n<p>Now my Project sEVen EV has got two CAN busses at the moment, and soon to be three. CAN1 connects my Vehicle Control Unit (VCU) to the Traction DC to DC converter (TDCDC), then to a Voltage and Current device (shunt) connected between the TDCDC and the battery and my Power Delivery Module (PDM). So that\u2019s 4 devices chatting away on CAN1.<\/p>\n<p>CAN2 is dedicated to the VCU talking to the inverter &#8211; two devices, but they talk at 1 megabit per second where CAN1 is half that rate.<\/p>\n<p>CAN3 will be for the battery management system (BMS).<\/p>\n<p>There\u2019s about 1000 messages a second on CAN1 and about 2000 messages a second on CAN2. Each message is usually 8 bytes.<\/p>\n<p>Now the VCU is connected to all these CAN busses but if the VCU were to have a problem then I\u2019d have limited ways of knowing what happened just before the problem. If I can \u201ccapture\u201d all the messages on the CAN busses, without using the VCU, then I\u2019d have a really good idea of what the whole powertrain was doing before there were problems. The CAN busses also tell me if the various devices have faults or don\u2019t do what I wanted them to.<\/p>\n<p>Once I\u2019ve done a test cycle on the bench powertrain, and captured all the CAN bus data, I then feed it all into another set of AIs that chop it all up and produce various reports and graphs for me.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2160\" height=\"1440\" data-attachment-id=\"12298\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-shunt-precharge-2a\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a.png\" data-orig-size=\"2160,1440\" data-comments-opened=\"1\" data-image-title=\"project-seven-ai-generated-electronics-shunt-precharge-2a\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;One of the AI-generated plots from a bench test: voltage and current during precharge, with the voltage dip clearly visible.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a-2048x1365.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a.png\" alt=\"Three plots of CAN bus shunt readings during precharge, showing switched-positive voltage dropping to about 21 V and a current peak near 2.7 A.\" class=\"wp-image-12298\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a.png 2160w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a-600x400.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a-2048x1365.png 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a-768x512.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-shunt-precharge-2a-1536x1024.png 1536w\" sizes=\"auto, (max-width: 2160px) 100vw, 2160px\" \/><figcaption>One of the AI-generated plots from a bench test: voltage and current during precharge, with the voltage dip clearly visible.<\/figcaption><\/figure>\n<p>\u2026 but that\u2019s another story.<\/p>\n<p>So grabbing all the CAN bus messages on all the busses is a good idea.<\/p>\n<p>And to do that I\u2019ve created my own, what I\u2019ll call, CAN bus Sniffer. They sniff the messages on the bus, not actively taking part on the bus but just sampling what\u2019s going on\u2026. sniffing.<\/p>\n<p>I\u2019ve been doing this sort of thing for about 8 or 9 years now so have gone through a few generations.<\/p>\n<p>For the Project sEVen I\u2019ve recently been using a \u201cstack\u201d of boards on each CANbus.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1440\" data-attachment-id=\"12299\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-previous-sniffer-stack\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-scaled.jpg\" data-orig-size=\"2560,1440\" data-comments-opened=\"1\" data-image-meta=\"{&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-ai-generated-electronics-previous-sniffer-stack\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The previous sniffer stacks \u2014 processor, OLED display and CAN bus interface, all piled on top of each other.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-2048x1152.jpg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-scaled.jpg\" alt=\"Two CAN bus sniffer stacks on the workbench, each with an OLED display, stacked circuit boards and an OBD connector.\" class=\"wp-image-12299\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-scaled.jpg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-600x338.jpg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-2048x1152.jpg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-768x432.jpg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-previous-sniffer-stack-1536x864.jpg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption>The previous sniffer stacks \u2014 processor, OLED display and CAN bus interface, all piled on top of each other.<\/figcaption><\/figure>\n<p>There\u2019s a processor board (in the middle of the stack, doing all the smarts and connecting to my computers), an OLED display (giving me an instant view of whether the bus is active) and a CAN bus interface at the bottom and connecting to an OBD connector. The CANbus interfaces I\u2019ve been using are from <a href=\"http:\/\/MrDIY.ca\">MrDIY.ca<\/a>. The guy behind the project is very friendly and I\u2019ve ordered half a dozen of his boards from him.<\/p>\n<p>So this stack has been running for a few months. As standard you\u2019re supposed to download some open source code to run on the processor, but I needed some extra functions\u2026 (you guessed it) so I pointed ChatGPT at it and it rewrote the firmware and that\u2019s what I\u2019ve used over the summer.<\/p>\n<p>But, the processor in the stack (an ESP32-C6 if you\u2019re nerdy in that way) was having problems talking to my Macs. I tried 4 or 5 different variants of the processor board that fitted the MrDIY boards, but they all had communications problems with my Macs. Every few hundred thousand CAN bus frames the interface between the stack of boards and my Mac would corrupt a captured packet. I tried all sorts of stuff to fix it and the problem would change shape but it wouldn\u2019t go away.<\/p>\n<p>What did fix the problem was going for an ESP32 processor board that has a \u201cnative\u201d USB interface &#8211; if you know, you know. But the ESP32 processors with a native interface did not fit on the MrDIY CANbus boards\u2026 they physically were different sizes.<\/p>\n<p>And that was where I got to until about 3 weeks ago.<\/p>\n<p>Every time I tested the powertrain I would lose a few CAN bus packets that I didn\u2019t capture properly and I would have to guess whether they might have contained a problem. By the laws of averages they didn\u2019t, but it was still bugging me.<\/p>\n<p>What I\u2019d been thinking for a few weeks was that I really needed a bespoke adapter board that would connect the \u201cnative\u201d ESP32 processor board to the OLED and the MrDIY CAN bus interface.<\/p>\n<p>Then, of course, it dawned on me\u2026 AI.<\/p>\n<p>I\u2019d seen a couple of YouTube videos where people had got AI to do some stuff that was close to what I wanted but not quite the same.<\/p>\n<p>So one afternoon I sat down with ChatGPT in front of me and came up with a simple prompt..<\/p>\n<p>\u201cHere\u2019s the three boards I want to connect together. Here\u2019s what I want them to do. Here\u2019s the sort of size of board I\u2019d like. And here\u2019s how I\u2019d like to get it made (PCBWay in China). \u201c<\/p>\n<p>The AI went to work and first designed a Schematic to do what I wanted. It then went and designed the PCB to do it. It used an open source program called KiCad. I\u2019ve never used KiCad before and it still bemuses me how some of it works.<\/p>\n<p>BUT, the AI just went and used KiCad. It figured out what connections I needed between the three boards. It went to the PCBWay website and found out what thickness of signal lines and how far each can be apart (known as the track and gap) etc. (It worked out all the design rules it needed to work to.) It worked out all the interconnects between layers (I wanted a 4 layer board).<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1502\" data-attachment-id=\"12300\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16-52-27\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-scaled.png\" data-orig-size=\"2560,1502\" data-comments-opened=\"1\" data-image-title=\"project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The adapter board layout in KiCad, connecting the native-USB processor board, OLED and MrDIY CAN bus interface.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-2048x1201.png\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-scaled.png\" alt=\"KiCad PCB editor showing the long adapter board layout, with connector pads, routed tracks, mounting holes and cutouts.\" class=\"wp-image-12300\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-scaled.png 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-600x352.png 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-2048x1201.png 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-768x451.png 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-screenshot-2026-10-20-at-16.52.27-1536x901.png 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption>The adapter board layout in KiCad, connecting the native-USB processor board, OLED and MrDIY CAN bus interface.<\/figcaption><\/figure>\n<p>And then it gave me a zip file containing all the files I needed to send to PCBWay to get the board manufactured.<\/p>\n<p>Oh\u2026 and it also made me a prototype board\u2026 a 3D model of the board that I could 3D print and test all the components fitted in the right place before I ordered the boards from PCBWay!<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1920\" data-attachment-id=\"12301\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-img-3602\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-scaled.jpeg\" data-orig-size=\"2560,1920\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;2.2&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1792514968&quot;,&quot;focal_length&quot;:&quot;2.2200000286119&quot;,&quot;iso&quot;:&quot;320&quot;,&quot;shutter_speed&quot;:&quot;0.02&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-ai-generated-electronics-img-3602\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The 3D-printed prototype, checking that all three boards would fit before ordering the real PCBs.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-2048x1536.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-scaled.jpeg\" alt=\"Grey 3D-printed adapter prototype holding a blue processor board and OLED display above the CAN interface and OBD connector.\" class=\"wp-image-12301\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-scaled.jpeg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-600x450.jpeg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-2048x1536.jpeg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-768x576.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3602-1536x1152.jpeg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption>The 3D-printed prototype, checking that all three boards would fit before ordering the real PCBs.<\/figcaption><\/figure>\n<p>Now, I have to admit a bit of prior art. I do have a degree in electronics and for a few years (about 30 years ago) I did make a living designing up to 16 layer printed circuit boards. So could I have gone and done this myself\u2026 for sure.<\/p>\n<p>Did I want to, no.<\/p>\n<p>It would have taken me a week or so and it would have been a diversion. This was an interesting little project, but it wasn\u2019t something I wanted to spend a week on.<\/p>\n<p>But with ChatGPT, and me checking its output, suggesting a few changes, and giving it the right starting prompt, it was able to design me a board in about 2 hours. I spent about an hour of that time talking to it and the rest of the time it was working by itself.<\/p>\n<p>I then decided I should test out what it was suggesting. So\u2026 I breadboarded the three boards together to make sure I wasn\u2019t going to waste some money (and time) sending off what ChatGPT had created.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1920\" data-attachment-id=\"12302\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-img-3695\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-scaled.jpeg\" data-orig-size=\"2560,1920\" data-comments-opened=\"1\" data-image-meta=\"{&quot;aperture&quot;:&quot;2.2&quot;,&quot;camera&quot;:&quot;iPhone 16 Pro&quot;,&quot;created_timestamp&quot;:&quot;1793712475&quot;,&quot;focal_length&quot;:&quot;2.2200000286119&quot;,&quot;iso&quot;:&quot;200&quot;,&quot;shutter_speed&quot;:&quot;0.01&quot;,&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-ai-generated-electronics-img-3695\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The breadboard version \u2014 a quick check of the connections before committing to the manufactured boards.&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-2048x1536.jpeg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-scaled.jpeg\" alt=\"Processor board and OLED display on a breadboard, connected by coloured jumper wires to a MrDIY CAN bus interface.\" class=\"wp-image-12302\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-scaled.jpeg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-600x450.jpeg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-2048x1536.jpeg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-768x576.jpeg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-img-3695-1536x1152.jpeg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption>The breadboard version \u2014 a quick check of the connections before committing to the manufactured boards.<\/figcaption><\/figure>\n<p>I mostly got the breadboard working, but it was enough to prove that my idle banter with ChatGPT wasn\u2019t going to be a waste of money.<\/p>\n<p>So, I hit the send button, paid the $60 on my debit card and sat back to wait for PCBWay to make my PCB.<\/p>\n<p>And two weeks later I got a package in the post. 6 shiny new PCBs. This morning in fact.<\/p>\n<p>I did the usual power and ground tests. Made sure the three boards physically fitted where they should do. And crucially that each board wasn\u2019t reversed or backwards. This is a common PCB problem, you don\u2019t realise that the documentation you\u2019ve been using for a component is viewed from the other side from what you thought, and you end up with a PCB that needs a mirrored version of your component on it.<\/p>\n<p>But amazingly it all seemed to pass muster. So I built up the boards and plugged each board in, in turn so I only blew one board up and not all three.<\/p>\n<p>AND IT WORKED!<\/p>\n<p>FIRST TIME!<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2560\" height=\"1440\" data-attachment-id=\"12303\" data-permalink=\"https:\/\/purplemeanie.co.uk\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board\/\" data-orig-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg\" data-orig-size=\"2560,1440\" data-comments-opened=\"1\" data-image-meta=\"{&quot;orientation&quot;:&quot;1&quot;}\" data-image-title=\"project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board\" data-image-description=\"\" data-image-caption=\"&lt;p&gt;The finished adapter board running on the bench, with CAN1 traffic appearing on the OLED. It worked first time!&lt;\/p&gt;\n\" data-large-file=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-2048x1152.jpg\" src=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg\" alt=\"Assembled green adapter PCB with a USB-connected processor board, OLED displaying CAN1 traffic and an attached OBD cable.\" class=\"wp-image-12303\" srcset=\"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg 2560w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-600x338.jpg 600w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-2048x1152.jpg 2048w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-768x432.jpg 768w, https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-1536x864.jpg 1536w\" sizes=\"auto, (max-width: 2560px) 100vw, 2560px\" \/><figcaption>The finished adapter board running on the bench, with CAN1 traffic appearing on the OLED. It worked first time!<\/figcaption><\/figure>\n<p>I\u2019ve done dozens of printed circuit boards over the years. And you often have to do a version 2 or 3 or 4, because you\u2019ve cocked up on something in version 1. But no, this thing worked first time!<\/p>\n<p>ChatGPT had taken a bunch of web links, a bit of guidance from me and made a Printed Circuit Board all by itself. If you\u2019ve made circuit boards in the past then you\u2019re probably picking yourself up off the floor. I was!<\/p>\n<p>So I\u2019ve been running the boards this afternoon (they only arrived this morning) and they\u2019re perfect. I\u2019ve captured millions of CAN bus packets this afternoon, and not a single packet corrupted.<\/p>\n<p>Great use of AI!<\/p>\n<p>This wasn\u2019t a critical or core part of my EV project. But it will make my life a lot easier as I go forwards. I wouldn\u2019t have wanted to get diverted by it if I\u2019d had to design the PCB myself, but doing it with AI was absolutely a game changer. It was at least 10 times faster than I could have done it, AND it did a better job than I would have done! It suggested a few things that I wouldn\u2019t have thought about. I absolutely knew about those things, but I wouldn\u2019t have thought to do them.<\/p>\n<p>So, job well done!<\/p>\n<p>BONKERS!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Designing a custom CAN bus sniffer adapter PCB with ChatGPT, checking the design with a printed prototype and breadboard, and testing the manufactured boards.<\/p>\n","protected":false},"author":1,"featured_media":12303,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_seo_schema_type":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":true,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[51,38],"tags":[55,58,66,57,64],"class_list":["post-12304","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-caterham-blog","category-electric-vehicles","tag-3d-models","tag-can-bus","tag-caterham","tag-electric-vehicles","tag-project-seven"],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8yl38-3cs","jetpack-related-posts":[{"id":4765,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2019\/08\/31\/ecu-diagnostics-part-2-ecu-obd-and-can\/","url_meta":{"origin":12304,"position":0},"title":"ECU Diagnostics \u2013 part 2 : ECU, OBD and CAN","author":"John Martin","date":"August 31, 2019","format":false,"excerpt":"Explains the Caterham MBE 9A4 ECU, how it exposes diagnostic data, and how OBD and CAN bus concepts fit into the ECU diagnostics project.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"MBE 9A4 ECU module label on a purple background.","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/9A4.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":4769,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2019\/09\/01\/ecu-diagnostics-part-3-test-setup\/","url_meta":{"origin":12304,"position":1},"title":"ECU Diagnostics &#8211; part 3 : Test Setup","author":"John Martin","date":"September 1, 2019","format":false,"excerpt":"Sets up the Caterham ECU diagnostics test rig using the OBD port, Raspberry Pi, PiCAN interface, Easimap, and CAN bus capture hardware.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"Diagram linking Raspberry Pi, PiCAN, MBE 9A4 ECU, and a laptop running Easimap.","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/Test-Setup-Diagram.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/Test-Setup-Diagram.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/Test-Setup-Diagram.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/Test-Setup-Diagram.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/Test-Setup-Diagram.png?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":5112,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2019\/09\/20\/ecu-diagnostics-part-13-three-diagnostic-protocols-in-the-mbe-9a4-ecu\/","url_meta":{"origin":12304,"position":2},"title":"ECU Diagnostics &#8211; part 13 : Three Diagnostic Protocols in the MBE 9A4 ECU","author":"John Martin","date":"September 20, 2019","format":false,"excerpt":"Introduces the three diagnostic protocols found on the Caterham MBE 9A4 ECU: MBE-Broadcast, OBD-II, and the MBE ISO-TP protocol used by Easimap.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":4782,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2019\/09\/07\/ecu-diagnostics-part-4-wireshark-patching-and-obd-ii-results\/","url_meta":{"origin":12304,"position":3},"title":"ECU Diagnostics &#8211; part 4 : Wireshark Patching and OBD-II Results","author":"John Martin","date":"September 7, 2019","format":false,"excerpt":"Uses patched Wireshark decoding to inspect Caterham CAN bus captures and compare the useful diagnostic data available through OBD-II.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"Wireshark capture with OBD-II packets decoded after the dissector fix.","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2019\/08\/cano7-OBD-II-working.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":4726,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2019\/08\/31\/ecu-diagnostics-part-1-introduction\/","url_meta":{"origin":12304,"position":4},"title":"ECU Diagnostics &#8211; part 1 : Introduction","author":"John Martin","date":"August 31, 2019","format":false,"excerpt":"Introduction and index for the Caterham ECU diagnostics series, covering MBE ECU traffic, CAN bus, OBD-II, ISO-TP, test setup, protocol decoding, and supporting Python and Wireshark tooling.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":8652,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2024\/04\/11\/putting-the-ev-in-seven-lowflying-part-5-spring-24-progress\/","url_meta":{"origin":12304,"position":5},"title":"Putting the EV in sEVen \u2013 Lowflying part 5 : Spring &#8217;24 Progress","author":"John Martin","date":"April 11, 2024","format":false,"excerpt":"So, it was about time I did an update for the Caterham and Lotus Seven Club magazine, Low Flying. This article is the Spring 2024 progress update and covers: Scanning the Car Component Configuration CANbus Configuration Suspension Logger","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"Putting the EV in Seven - Low Flying Part 5 Progress 1","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2024\/04\/PTEVIS-5-Fanfold.png?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_likes_enabled":true,"jetpack_featured_media_url":"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-ai-generated-electronics-new-ai-generated-sniffer-adapter-board-scaled.jpg","_links":{"self":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12304","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=12304"}],"version-history":[{"count":1,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12304\/revisions"}],"predecessor-version":[{"id":12323,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12304\/revisions\/12323"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media\/12303"}],"wp:attachment":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=12304"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=12304"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=12304"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}