{"id":12290,"date":"2026-11-08T19:00:00","date_gmt":"2026-11-08T19:00:00","guid":{"rendered":"https:\/\/purplemeanie.co.uk\/?p=12290"},"modified":"2026-11-21T20:13:11","modified_gmt":"2026-11-21T20:13:11","slug":"2026-11-project-seven-bench-update","status":"publish","type":"post","link":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/08\/2026-11-project-seven-bench-update\/","title":{"rendered":"2026-11 Bench Update"},"content":{"rendered":"<p>As promised, here\u2019s another update\u2026 this time about the Bench.<\/p>\n<p>After yesterday\u2019s gearbox update the next biggest topic is probably how the testing\u2019s going. As you probably all know I have a bench setup in my garden office where I do all the software work and try to get my drivetrain working.<\/p>\n<p>The last update I did on YouTube was all about how I was using AI to develop the Vehicle Control Unit code (firmware). And that\u2019s pretty much what I\u2019ve been doing for the past few months. At the point of that video I\u2019d got about 2\/3 of the drivetrain working and was looking at hooking up the inverter and motor.<\/p>\n<p>Well I got both of those connected &#8211; after a bit of a struggle (more about that in a future post). At about every stage something didn\u2019t quite work the way I thought it would and I had to backtrack and change my approach. I\u2019ve put together a quick update video that I\u2019ll link to below. And that in itself is a story &#8211; because I\u2019ve had AI so intertwined with my project, I could just ask AI to create me a video about the state of the workbench. And this is what it came up with. I had to feed it some images and tweaked it over a few iterations, but the video is essentially all edited with AI. That would have taken me a week to have done by myself and AI did it over the course of about 24 hours as I poked it from time to time. At some point I might put a voice over to it along with more of an update and make it live on YouTube, but for the moment it\u2019s an unlisted video, so you\u2019ll only find it from the link below.<\/p>\n<p>And the AI has been really busy on not just the software but the testing too. For quite a few weeks I was getting my AI to run all the bench testing. It would communicate with my power supplies, oscilloscopes, logic analysers etc and would orchestrate a test run &#8211; firing up the bench, precharging the power train, initiating the inverter and then tearing the whole test down again.<\/p>\n<p>[ for some of you that are AI nerds, this was mostly done with MCP connections to the various software apps and hardware ]<\/p>\n<p>It would then capture all the waveforms from the equipment, analyse the CANbus captures (I have two CAN busses at the moment &#8211; soon to be three). It would then correlate all the captures along with the logs from the Vehicle Control Unit and tell me where there were errors or timing issues. The whole thing was automated through AI. It could then draw me plots of things like current and voltage, pre-charge rise times, CANbus transaction ladder diagrams etc etc.<\/p>\n<p>But I was finding that the AI wasn\u2019t thinking quickly enough. It would take a couple of minutes to run through all its machinations to make a bench test cycle happen. The result was, frankly, incredible, but it took a bit of time.<\/p>\n<p>So now I do things a little differently. The AI still changes the code, adds new features and analyses all the results from a test run. But the actual test run is orchestrated by a Python script. I run the script from a terminal and it guides me through the test run. It asks me to press the brake pedal, or the throttle or turn the ignition on. Those are things I haven\u2019t automated (yet). But the Python script will run through a test cycle in 30 seconds rather than 2 minutes that the AI took. The AI still analyses all the results but it\u2019s dropped my testing time considerably. I show a bit of that in the video.<\/p>\n<p>The bench has got to the point where I can power up all the drivetrain (precharge etc) then set it so it\u2019s just ready to turn the motor. BUT, my bench power supply that I\u2019m using to replace the VW battery modules, hasn\u2019t got enough oomph to turn the motor. It current limits during precharge, and wouldn\u2019t be up to turning the motor. So, I need to replace it with a real battery module. And that means I really need to get the Battery Management System running. It\u2019s very tempting just to see if the bench power supply will turn the motor, but I really really really don\u2019t want to cause damage by a bunch of very expensive components being current limited and getting damaged &#8211; they could go into a shutdown mode and one of them doing that could cause problems for another device and damage that. So I don\u2019t want to do that.<\/p>\n<p>The bench supply I\u2019m using as a surrogate battery also can\u2019t sink (receive) current. So if the motor were to get moving a bit too quickly and then I shut things off, the back emf of the motor could induce quite a high reverse current that could blow up my power supply. I really really don\u2019t want that to happen either.<\/p>\n<p>So all in all I think it\u2019s better that I take things slowly and hook up a battery module correctly. And that\u2019s a whole bunch of new code and a lot of testing, just to get back to where I\u2019m ready to turn the motor again.<\/p>\n<p>Better safe than sorry though.<\/p>\n<p>Here\u2019s the link to the update video. Hopefully it makes sense. Sorry it\u2019s a bit long, but it\u2019s a complicated system and if I skim over stuff then it\u2019ll be completely unintelligible to everyone.<\/p>\n<p><span class=\"embed-youtube\" style=\"text-align:center; display: block;\"><iframe loading=\"lazy\" class=\"youtube-player\" title=\"YouTube video player\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/9cWlBZj-Dns?version=3&#038;rel=1&#038;showsearch=0&#038;showinfo=1&#038;iv_load_policy=1&#038;fs=1&#038;hl=en-US&#038;autohide=2&#038;wmode=transparent\" allowfullscreen=\"true\" style=\"border:0;\" sandbox=\"allow-scripts allow-same-origin allow-popups allow-presentation allow-popups-to-escape-sandbox\"><\/iframe><\/span><\/p>\n<p>Any questions then let me know.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A November 2026 Project sEVen bench update: connecting the inverter and motor, using AI and Python to test the drivetrain, and preparing for battery-powered testing.<\/p>\n","protected":false},"author":1,"featured_media":12289,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_seo_schema_type":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":true,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[51,38,26],"tags":[58,66,89,57,73,64],"class_list":["post-12290","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-caterham-blog","category-electric-vehicles","category-youtube","tag-can-bus","tag-caterham","tag-drivetrain","tag-electric-vehicles","tag-motor-controller","tag-project-seven"],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p8yl38-3ce","jetpack-related-posts":[{"id":11251,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/02\/22\/project-seven-update-feb26-short\/","url_meta":{"origin":12290,"position":0},"title":"Project sEVen Update Feb26 Short","author":"John Martin","date":"February 22, 2026","format":false,"excerpt":"Brusa BDC668 traction DC2DC converter working on the bench. A quick update on progress with my Project sEVen test bench. As I build up the system to eventually get my motor spinning on the bench, today I get as far as running up the Brusa BDC668 to do a DC\u2026","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/Screenshot-2026-02-22-at-12.52.51.jpeg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":8125,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2022\/09\/30\/seven-index\/","url_meta":{"origin":12290,"position":1},"title":"Putting the EV in sEVen &#8211; Index","author":"John Martin","date":"September 30, 2022","format":false,"excerpt":"Project sEVen is the electric conversion thread for the Caterham, covering mechanical packaging, EV power electronics, CAN bus diagnostics, 3D scanning, CAD references, and systems integration.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2022\/09\/Cartoon-Seven-Vector-with-EV-Purple-Bumper.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":11261,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/02\/22\/project-seven-jan26-update-short\/","url_meta":{"origin":12290,"position":2},"title":"project sEVen Jan26 Update Short","author":"John Martin","date":"February 22, 2026","format":false,"excerpt":"Quick update video. Just getting the test bench set up. Lots is going to change in the next few weeks. https:\/\/youtube.com\/shorts\/7cyrt5BPVSQ","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/02\/IMG_1882-Annotated-scaled.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":11273,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/04\/24\/project-seven-pt9-traction-dc2dc-converter-bring-up\/","url_meta":{"origin":12290,"position":3},"title":"Project sEVen Pt9: Traction DC2DC converter Bring Up","author":"John Martin","date":"April 24, 2026","format":false,"excerpt":"Project sEVen update covering traction DC-DC converter bring-up, high-voltage testing, low-voltage integration, CAN bus work, and the Caterham EV testbench.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/04\/Project-sEVen-pt9-001_2-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":12285,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2026\/11\/07\/2026-11-project-seven-gearbox-update\/","url_meta":{"origin":12290,"position":4},"title":"2026-11 Gearbox Update","author":"John Martin","date":"November 7, 2026","format":false,"excerpt":"A November 2026 update on the Project sEVen gearbox: the completed 3.5:1 reduction design, the search for manufacturers, and a 3D-printed version.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"3D-printed cutaway model of the Project sEVen gearbox, showing coloured internal components, gears, shafts and bearings","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/project-seven-gearbox-printed-model-scaled.jpeg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":10884,"url":"https:\/\/purplemeanie.co.uk\/index.php\/2025\/04\/30\/putting-the-ev-in-seven-progress-2-strip-down-and-weigh-in\/","url_meta":{"origin":12290,"position":5},"title":"Putting the EV in sEVen &#8211; Progress #2 Strip Down and Weigh-in","author":"John Martin","date":"April 30, 2025","format":false,"excerpt":"Project sEVen progress video covering the Caterham strip-down, removal of the internal-combustion drivetrain, weigh-in work, and related EV project events.","rel":"","context":"In &quot;Caterham Blog&quot;","block_context":{"text":"Caterham Blog","link":"https:\/\/purplemeanie.co.uk\/index.php\/category\/caterham-blog\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/purplemeanie.co.uk\/wp-content\/uploads\/2025\/04\/PTEVIS4-001-scaled.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_likes_enabled":true,"jetpack_featured_media_url":"https:\/\/purplemeanie.co.uk\/wp-content\/uploads\/2026\/11\/2026-11-project-seven-bench-setup-scaled.jpg","_links":{"self":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12290","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=12290"}],"version-history":[{"count":1,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12290\/revisions"}],"predecessor-version":[{"id":12291,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12290\/revisions\/12291"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media\/12289"}],"wp:attachment":[{"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=12290"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=12290"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/purplemeanie.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=12290"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}